Do you need a Price?

EOS97 Modular
 rooflights

A modular flat roof glazing system that combines fixed, opening and walk-on configurations into a single continuous installation. Designed for large roof openings where a single-pane solution is impractical — with thermally engineered junction bars, push-and-fix assembly and full Part L documentation.

What’s a Modular Rooflight System?

A modular rooflight system links individual fixed, opening and walk-on units side by side to create a continuous glazed area. Each unit is manufactured and delivered independently, simplifying transportation and reducing crane requirements on site. Assembly uses a push-and-fix process with a waterproof top plate and robust gasket system across all junctions.

The EOS97 modular system is suitable for residential extensions, commercial developments and new-build schemes where a large daylighting aperture is required — with no practical upper limit on the number of modules within a single installation.

 

The EOS97 modular system accommodates the full range of functional requirements within a single installation:

All modules share identical external and internal sight lines, ensuring a consistent architectural finish across the full installation.

Fixed modular allow slim sightlines - split into 3 units

Fixed Modules

Fixed modules — maximum daylighting with minimum frame, thermal performance to 0.88 W/m²K

3 panel modular rooflight 2 opening and 1 fixed unit

Opening Modules

hare identical external and internal sight lines — no difference in profile or upstand height between configurations.

modular rooflight that you can walk on with wall abutment

Walk On Modules

Residential and commercial foot traffic specifications, thermal performance to 0.73 W/m²K

Easy installation and
guaranteed compliance

At EOS, our modular rooflights are delivered as individual units to simplify transportation and handling. Designed for a straightforward push-and-fix assembly, they ensure a quick and hassle-free installation process.

Each unit comes with our integrated, thermally efficient upstand, ensuring your installation is not only smooth but also fully compliant with Part L regulations. This approach guarantees both performance and peace of mind in your roofing solutions.

Unmatched Energy Efficiency

The EOS97 modular rooflight achieves independently certified U-values of 1.23 W/m²K (double-glazed) and 0.84 W/m²K (triple-glazed with 97mm insulated upstand) — meeting and exceeding the requirements of Approved Document L. Performance certificates for double and triple-glazed configurations are available to download for specification and building control submissions.

Download technical details, brochures and spec sheets for the EOS97 modular rooflight system.

Min. Structural Size:400mmMax. Structural Size:4000mm
Upstand Height Opt:150/300mmUpstand Pitch Opt:Flat/5 Degrees
Standard Ext. Colour:RAL7016Standard Int. Colour:White
Glass Outer Opt:6/8 or 10mm Heat Soak TestedGlass Inner Opt:8.8/10.8/11.5mm Laminate
Double Glazed U Value:1.23 W/m2KTriple Glazed U Value:0.84 W/m2K
Air Permeability:EN 12207Watertightness:EN 12208

Optional Extras
Solar control glass – Reduces solar heat gain and offers high levels of natural light
Ritec easy clean glass finish – Makes the surface of the glass ‘non-stick’

Attention to detail, without compromising on design

For fixed-only modular configurations, slim aluminium or glass fins are used at the junction, with options for powder-coating in any RAL colour to suit the interior finish specification.

EOS75 modular bar detail - minimal bar for fixed only rooflights

Junction engineering — thermal performance at every connection

The junction between modular units is the most critical point in any large-format rooflight installation — both thermally and weathertightness.

The EOS97 opening modular system addresses this with a proprietary thermally broken support bar at each junction point, a waterproof top plate that channels water away from the joint, and a continuous gasket system tested to EN 12207 (air permeability) and EN 12208 (watertightness).

EOS97 modular fixed opening support bar
Bespoke modular rooflight split into 3 units | Includes insulated upstand

Specification support — from brief to installation

Bespoke fixed rooflight | large non opening modular rooflight with wall abutment

EOS works directly with architects, contractors and specialist glazing installers from initial specification through to site completion. Our in-house technical team provides DWG drawings, PDF details, NBS product clauses and performance certificates — everything needed to support a complete specification submission.

For complex modular installations, we offer pre-tender design consultations and can produce site-specific installation drawings on request.

Request a Quote

All of our modular rooflights are custom-manufactured to your exact specifications. To receive a personalised quote, please fill out the form below.

Contact our team

If you have any questions, would like a bespoke price or want to enquire about our installation service. Give us a call or drop an email:

Call EOS Rooflights today 0208 462 3557

Eamil EOS Rooflights Today [email protected]

Modular panel rooflight split into 2 panels in stylish referb and extension
Shaker style kitchen with modular rooflight system
Modular rooflight system | Walk on into basment room
open plan kitchen with modular rooflight and fixed unit rooflight.

Our other products

Rooflights

Choose which flat glass rooflight are right for your project

We offer a wide range of rooflights designed for flat and low pitched roofs.

LaNterns

Which lantern roof light system works for new build | Our lantern rooflight selector will help

Our slim line lanterns are a modern twist on the traditional.

Skylights

See our pitched skylight designed for flat tiled pitched roofs

Frameless design coupled with exceptional thermal performance.